About O-Sulee Anti-Theft Wireless Alarm

Product Features

Instant Installation (D.I.Y)
No Electrical wire needed, just 5 minutes of installation
Can automatically armed & disarmed the security system
Compatible with any existing alarm system
utomatically detects the following: Door Open Warnings, Back Trunk Open Warnings, Window Break Warnings, WheelRemoving, Hit and Tow Warnings.
Adjust the sensitivity of the alarm thru the wireless pager

The wireless detection sensor could standby for 5days with 3 to 5 hours of charge

Applicable to all types and models of vehicles

Intallation Guide

1. Turn the switch “ On” button of the wireless detection sensor. Turn clockwise direction for HIGH sensitivity and turn counterclockwise direction for LOW sensitivity.

2. Plug it to the 12volt lighter socket for charging when ignition key is On

3. Magnet the siren in the hood, keep the siren a little downward to avoid water goes in. Do not install the siren near the engine or high temperature area.

4. Connect the red wire to the positive node and black wire to the negative node of the car battery. Keep the small black antenna wire straight and away from the steel in order to achieve longer range.

Operating Manual :