Continuous Duty Agency Approved Water Resistant Safe & Easy Priming   PULSAtron Series A+ The PULSAtron Series A+ offers manual control over stroke rate and stroke length as standard with the option to select external pacer for automatic control. Six distinct models are available, having pressure capabilities to 250 PSIG, and flow capacities to 48 GPD, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity. Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series A+ pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of our high quality solenoid and special enclosure that effectively dissipates heat. A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 CPS. Agency Approved and water resistant for demanding outdoor and indoor applications. Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon®, Viton®, ceramic, alloys, and 316S              

PULSAtron Electronic Pumps
Series A+   Designed to pump a wide variety of chemicals at pressures up to 250 PSIG and flow capacities up to 48 GPD with a turndown ration of 100:1. Manually control stroke rate and stroke length.		Series C   Designed to pump a wide variety of chemicals at pressures up to 80 PSIG and flow capacities up to 30 GPD with a turndown ration of 10:1. Liquid Low Level option available to prevent loss of prime.
Series C+   Designed to pump a wide variety of chemicals at pressures up to 80 PSIG and flow capacities up to 30 GPD with a turndown ration of 100:1. Manually control stroke rate and stroke length.		Series D   Completely digital controls displayed on a backlit LCD screen & four-button touchpad controls. Designed to pump a wide variety of chemicals at pressures up to 250 PSIG, and flow capacities up to 48 GPD with a turndown ration of 100:1.
Series E and E-DC   Designed to pump a wide variety of chemicals at pressures up to 300 PSIG @ 3 GPD, and flow capacities up to 500 GPD @ 20 PSIG, with a turndown ratio of 100:1. Manually control stroke rate and stroke length.		Series E+   Automatic control available with direct or external pacing. Designed for pressures up to 300 PSIG @ 3 GPD and flow capacities up to 504 GPD @ 20 PSIG. Manual control of stroke rate & length.
Series HV   Designed to handle viscous chemicals up to a viscosity of 20,000 CPS. Pressure capabilities up to 150 PSIG @ 24 GPD and flow capacities up to 240 GPD @ 80 PSIG with a turndown ratio of 100:1.		Series MP   Automatic controls and manual control allows for a 1000:1 turndown ratio. 6-button touchpad controls with a backlit LCD display. Designed for pressures up to 300 PSIG @ 3 GPD and flow capacities up to 500 GPD @ 20 PSIG.

PULSAtron Plus Pumps
Series CL   The Series CL provides conductivity monitoring and control with a Limit Timer that controls the feed time. Tower feed and bleed are initiated with a when the conductivity level reaches the user-specified set point.		Series CW   The Series CW provides conductivity control with a water meter feed. Bleed is initiated when the conductivity level reaches the user-specified set point. Chemical feed is initiated and controlled by input from a water meter.
Series ET   The Series ET provides feed control with input from a water meter input. The output connection provides an isolated dry contact output of the water meter contact to operate additional pumps or timers off the same water meter.		Series T7   The Series T7 was designed to control the feeding of biocide or other product that must be fed on a timed schedule. The Series T7 includes a 7-day programmable timer with the ability to control up to 8 on/off cycles per day.
Series WT   The Series WT provides feed and bleed control with a water meter input. The feed and bleed cycles are initiated and controlled by input from the water meter. Separate programmable pulse timers control the pump and bleed relay. More Information