• Limited moss, mildew or algae growth especially in bricks
• Increased resistance to wind or water-borne contaminants such as dust, dirt, oils, chemicals, etc.
• Easy maintenance and clean-up as the surface pores and capillaries are closed and sealed
• Increased surface hardening & abrasion resistance
• No change in color or texture of treated surface

PRODUCT DESCRIPTION

NovTek Concrete Sealer is a Potassium Methylsiliconate solution formulated to impart water-repellant properties to concrete, bricks, concrete roof tiles, pavers & natural stones such as adobe, mactan, slates, etc. NovTek Concrete Sealer penetrates into masonry surfaces and seals pores & capillaries to resist water infiltration.

USES AND APPLICATION

COVERAGE

IMPORTANT NOTES

• After initial application, wait about two (2) hours and test water absorption capacity of surfaces. Apply additional coats as desired.
• Do not let materials dry in puddles to avoid whitish deposits remaining on the surfaces.
• Allow the treated materials to cure at least 24 hours before use or exposure.
• Some materials may react better than others, in which case, solution may be diluted with water by up to 100% by volume.
• Being alkaline in nature, avoid contact with aluminum or light alloys or such materials sensitive to alkaline solutions.

DRYING TIME 

NovTek Concrete Sealer needs enough time to react & achieve full effective treatment. A certain degree of effectivity is achieved after 24 hours but full treatment would need at least 3 up to 7 days.

PACKAGING 

1 Gallon bottle.

CAUTION 

If swallowed, do not induce vomiting. Call a physician. If inhaled - if odor is strong or you notice dizziness, headache or eye-watering - leave the area immediately. If there is eye/ mucous membrane contact or skin irritation, flush with water for at least 15 minutes. Contains ALKALINE CORROSIVE LIQUID PH=12.KEEP OUT OF REACH OF CHILDREN.