Product Features

• Function: Ultra High Intensity Multi-task Nitecore MT26 Flashlight
• Main Features:
  - With two switch Modes suit various user requirements: Turbo and user-defined modes
  - High efficiency current circuit board
  - User-defined mode allows for customized brightness levels and a multitude of functions
  - Intelligent memory functions
  - Reverse polarity protection
  - Broad voltage drive circuit, compatible with rechargeable and non-rechargeable Li-ion batteries.
  - Detachable two-way anti-rolling clip
  - Purpose-made rhombic knurling for better grip
• LED:
  - Type: CREE XM-L U2 LED
  Quantity: 1
  - Luminous Flux: 800 lumens (Maximum)
  - Lifespan: 50,000 hours
• Working Mode: Turbo Mode and User-defined Mode
• Brightness:
  - Turbo: 800Lm
  - High: 250Lm
  - Middle: 78Lm
  - Low: 25Lm
• Special Mode: SOS and Strobe
• Material:
  - Aluminum alloy with type III Hard Anodizing
  - Toughened ultra-clear mineral glass with anti-reflective coating
  - Aluminum reflector ensures a smooth and powerful beam
  - Aero grade aluminum alloy
  - HA III Military grade hard anodized
• Power Source:
  - Powered by 1 x 18650 3.7V Battery (Not Included)
  - Powered by 2 x CR123 3.0V Batteries(Not Included)
• Waterproof: IPX8
• Impact Resistance: 1.5 m
• Peak Beam Intensity: 11,000 cd
• Beam Distance: 209 m
• Dimensions:
  - Length: 149mm
  - Head Diameter: 34mm
  - Tail Diameter: 25.4mm
• Net Weight: 133g
• Approved: CE / FCC

Operational Guidance:

• The Nitecore MT26 Flashlight Has Two Modes: turbo mode and user-defined mode. By tightening and loosening the flashlight head changes modes between two of them.
• Turbo Mode:
  - Turbo mode is accessed when the flashlight is Switch ON and the head of the flashlight has tightened perfectly. Momentary illumination can be achieved by lightly pressing the switch.
  - Note: After three minutes' using of turbo mode, the flashlight will lower its output automatically to prevent from overheating, and prolong the battery run time.
  - User-defined Mode: The user-defined mode is accessed by sightly loosening the flashlight head. In this mode, lightly pressing the switch will cycle through brightness and changing the mode as following: "High - Middle - Low - Sos - Strobe".
•  

Package Content

• 1 x NITECORE MT26 Flashlight (Without Battery and Charger
•